MANUAL FA145C Security System First Alert N8600 2/97. General Congratulations on your ownership of a First Alert Professional Security System. Typical displays that would appear on both Alpha and Fixed-Word keypads are depicted throughout this manual. The keypad's default address is 31. To change the keypad's address, do the following: 1. Enter address mode: Power up the keypad. Within 60 seconds of power-up, press and hold down the 1 and 3 keys at the same time for 3 seconds. (If unable to enter address mode, power up and try again.) The current keypad address will be displayed, and the. First Alert FA270KP Manuals & User Guides. User Manuals, Guides and Specifications for your First Alert FA270KP Keypad. Database contains 1 First Alert FA270KP Manuals (available for free online viewing or downloading in PDF): Installation and setup manual. First Alert FA220KP Installation And Setup Manual. Download Installation and setup manual of First Alert FA220KP Keypad for Free or View it Online on All-Guides.com. Brand: First Alert. Category: Keypad. Type: Installation and setup manual. Model: First Alert FA220KP, First Alert FA270KP, First Alert. Voice Keypads Voice Keypads (if installed), are functionally the same as other keypads, except that these keypads can provide the following:. Voice announcements of system status (see Checking for Open Zones section). Voice chime, which can alert you to the opening of doors and windows while the system is disarmed (see Voice Chime in.
- First Alert Fa260 Keypad Manual
- Honeywell First Alert Keypad Manual
- First Alert Fa260 Keypad Manual
Download Installation manual of First Alert FA215KP Keypad for Free or View it Online on All-Guides.com.
Brand: First Alert
Category: Keypad
Type: Installation manual
Model: First Alert FA215KP , First Alert FA260KP , First Alert FA560KP
Pages: 2
REMOTE KEYPADS
INSTALLATION GUIDE
FA215KP
FA260KP
FA560KP ✝
Backlit DisplayNOYES (See Note 1)YES (See Note 1)
Built-in SounderPiezoSpeakerSpeaker
FA110C*YESYESNO
FA142C*YESYESSee Note 2
FA162C*YESYESSee Note 2
FA1340C**YESYESSee Note 2
FA2000C*YESYESSee Note 2
The FA560KP must be used to program the FA142C, FA148C, FA162C, FA1220CV, FA1340C, FA1600C/CA/CB, & FA2000C controls.
*Use the non-addressable mode with these controls (set to address 31).
**Use the addressable mode with these controls (addresses 00-30).
Notes1.Permanent display backlighting is an option on some controls (see the control's instructions for details).
2.The FA560KP is required for certain advanced user functions (see the control's instructions for details).
3.Use the FA560KP with the red color insert (provided for fire installations) as required by local authority having jurisdiction
Remote Keypads and are intended for use with the controls
listed in table above. Addresses are set via the keypad keys
(no DIP switches). See the table above for valid addresses.
The keys on the keypads are continuously backlit for
KEYPAD DISPLAYS AND LEDS
The keypads have the following features of the display:
Fixed
Display
Alpha
2-digit
Identifier
Descriptors
FA260KPXX
The following table shows the LEDs and their functions:
RedLights when the system is armed in any mode
GreenLights when the system is 'ready' to be armed.
The keypads also feature function keys, see table below.
These keys may be programmed for panic alarms or other
special functions such as macros. See the control's
instructions for details. The FA215KP uses the key pairs
Function keys must be held down for at least 2
immediately.
A ([1] & [*])[1] & [*]
C ([3] & [#])[3] & [#]
The keypads can be surface mounted directly to a drywall, or to
by pushing down two 'snaps.'
through the
3.
Mount the case back
from the keypad’s terminal block to the
terminal block on the control board. Wire functions are
marked next to terminals. Labels are as follows: DI Data
In to Control Panel, - Ground, + Aux. Power Plus, DO Data
Out of Control Panel. See the control panel’s Installation
5.
Re-attach the keypad to its case back
6.
Remove the clear protective film from the LCD display.
the 2 'Snaps' along keypad's
apart
Related Products for First Alert FA215KP
Related Manuals for First Alert FA215KP
First Alert FA215KP: Frequently viewed Manuals
Download Installation and setup manual of First Alert FA220KP Keypad for Free or View it Online on All-Guides.com.
Brand: First Alert
Category: Keypad
Type: Installation and setup manual
Model: First Alert FA220KP , First Alert FA270KP , First Alert FA570KP
Pages: 2
R
REMOTE KEYPADS
INSTALLATION AND SETUP GUIDE
FA220KP
FA270KP
First Alert Fa260 Keypad Manual
FA570KP ✝
Backlit Display NO YES (See Note 1) YES (See Note 1)
Built-in Sounder Piezo-electric Speaker Speaker
First Alert Pro Controls
Fixed-Word
Fixed-Word
Honeywell First Alert Keypad Manual
2-Line Alpha
FA168CPS**, FA1220CV**, FA1340C**,
FA1600C/CA/CB**, FA1660C**,
NO NO YES
✝The FA570KP must be used to program the FA130CP, FA148CP, FA168C, FA168CPS, FA1220CV, FA1340C, FA1600C/CA/CB, FA1660C,
* Use the non-addressable mode with this (FA2000C) control (set to address 31).
** Use the addressable mode with these controls (addresses 00-30).
Notes: 1. Display backlighting is supported and timed out (see the control's instructions for details).
2.The FA570KP is required for certain advanced user functions (see the control's instructions for details).
ULC
For ULC installations, the FA1660C Series must be used with the FA570KP keypad.
GENERAL INFORMATIONWIRING AND INSTALLATION
remotekeypads and are intended for use with the controls
listed in the table above. Addresses are set via the keypad
keys (no DIP switches). The keypads are also compatible
with older control panels using the non-addressable mode
KEYPAD DISPLAYS AND LEDS
The keypads have the following features of the display:
Fixed
Display
Alpha
2, 3-digit
Identifier
Zone
FA220KP X 2-digit
FA570KP X 3-digit X
The following table shows the LEDs and their functions:
Red Lights when the system is armed in any mode
Green Lights when the system is 'ready' to be armed.
The keypads also feature programmable Special Function
keys. (See table below.) These keys may be programmed for
panic alarms or other special functions. See the control's
instructions for details. The FA220KP uses the panic key
pairs only. Special Function keys must be held down
FA270KP/FA570KP FA220KP
B or (✱ & # ) (✱ & # )
The keypads can be surface mounted directly to a drywall, or to
1.To remove the case back, insert a small screwdriver
blade at a downward angle into Slot 1 and twist (the
right side pops up). Insert the screwdriver blade at a
downward angle into Slot 2 and twist (the left side pops
up). Insert the screwdriver blade into right side narrow
Slot 3 and twist. Separate the case back from upper case.
2.Route wiring from the control panel through the large
3.Mount the case back to a wall or electrical box.
connecting the keypad. Wire directly from the
keypad’s terminal block to the terminal block on the
control’s PC board. Wire functions are marked next to
terminals. See the control panel’s Installation Instructions
5.Reattach the keypad to its case back.
Special
Keys
Slot 2
Slot 1
First Alert Fa260 Keypad Manual
ARMED
B
D
FA270KP (shown) & FA570KP contain four Special Function Keys
(Special Function Keys not available on the FA220KP)
Related Products for First Alert FA220KP
Related Manuals for First Alert FA220KP
First Alert FA220KP: Frequently viewed Manuals